ENVIROsense, a new environmental temperature, relative humidity and, optionally, barometric pressure transmitter is now available from Senseca, a specialist in the design and manufacture of monitoring and measurement instrumentation.
ENVIROsense can measure environmental temperature, relative humidity and barometric pressure.
“With all three measurement criteria in one device, ENVIROsense has been specifically designed for use in meteorological and renewable energies applications, HVAC, clean rooms, for OEMs and plant environments,” said Jan Grobler, Managing Director of Senseca South Africa.
“ENVIROsense offers multiple applications, long life, advanced measurement technology and a compatibility with any Modbus-RTU master device. It is already a market leader in the field of environmental monitoring instrumentation and is competitively priced,” Grobler added.
The device offers a resolution of RH 0.01%, a temperature measurement of plus/minus 0.1°C with plus/minus 0.1% of the measured value and a pressure measurement of plus/minus 0.5 hPa typical at T = 250 C and 0.1 hPa (500 to 1 100 hPa) at T = full range. Two optional additional 0…1 V, 0…5 V or 0…10 V (depending on the model) analogue outputs for temperature and relative humidity or dew point, with configurable temperature and humidity ranges, are also available.
ENVIROsense provides calculated humidity quantities such as: dew point, wet bulb temperature, absolute humidity, mixing ratio, specific enthalpy, water vapour partial pressure, specific humidity, frost point temperature, saturation vapour pressure above water, and saturation vapour pressure above ice.
With a rugged ø14 mm compact housing in PBT, it also offers an optional protection shield from solar radiation for outdoor applications.
The transmitter is supplied factory-calibrated in multiple points for relative humidity and ready for use. It can be supplied, if required, with an ISO/IEC 17025 calibration certificate.
Alternative models differ depending on the presence or absence of the optional barometric sensor and analogue outputs, the different power supply voltage range and the different application fields.
To maintain high accuracy measurements, the filter must be cleaned periodically. This requires a simple brush wash of the filter under running water, drying, and screwing it back into the transmitter body.
“As an all-in-one device, offering multiple measurement functions, we believe the ENVIROsense transmitter will be well received in those specialised industries where it can enhance the high accuracy standards required. Its advanced technology makes it a leader in environmental measurement and monitoring instrumentation,” said Grobler.
For more information visit: https://environmental.senseca.com/