With a solid reputation built on responsiveness to customers needs, MBE Minerals SA (MBE) believes it is the company’s high level of technical and aftermarket support that has seen it secure ongoing repeat business.

MBE will showcase its product and service offering at Electra Mining Africa 2018, and MD Johannes Kottmann says this will provide an opportunity for existing and new customers to engage with the company’s technical team.

Aftermarket support leads to repeat business for MBE

The BATAC® jig offers excellent separation accuracy.

Kottmann says that among the technologies that are seeing increasing demand is the BATAC® jig. The main advantage of this innovative technology is the excellent separation accuracy it offers as well as its relatively small footprint.

“Available at a comparatively low capital cost, this field-proven technology delivers higher throughput rates and efficiencies,” he states. “Add to this improved product quality and you begin to understand why it is acknowledged as offering significant economic benefits.”

The company’s ROMJIG® has also proven to be a reliable and economical solution in destoning raw coal. Kottmann says a lower percentage of refuse in the washery feed means reduced wear on machinery and transporting equipment, less grain degradation, less dust and slurry, and reduced consumption of flocculation and flotation agents in downstream fines recovery circuits.

Another technology that has attracted global attention is the Pneuflot® flotation technology which Kottmann describes as the flotation technology of the future. “There are 82 Pneuflot® installations in coal globally and in magnetite and haematite (itabirite) flotation,” he says.

The Pneuflot® flotation cell improves efficiency as well as product quality and recovery, delivering lower capital and operating costs. According to MBE, its unique design, with no rotating parts, achieves low energy consumption and less wear-and-tear than conventional agitator cells.

The Jones® Wet High Intensity Magnetic Separator (WHIMS) offers a high throughput capability coupled with simple maintenance and lower energy consumption. The robust WHIMS, operated at up to 14 500 Gauss, is ideally suited to treating feebly magnetic minerals with a particle range from 20 microns up to 1,5 mm with unit throughput capacities from 500 kg/h up to 250 t/h.

The largest WHIMS plant in the world, outside of Brazil, was installed in the Northern Cape by MBE Minerals SA.

Also available from MBE is the Palla Mill® which is suitable for both wet and dry applications in primary and secondary grinding and for pulverising materials of any hardness. It has a major advantage over other machines as it is capable of grinding more than 100 different materials, including a range of minerals and commodities previously considered unviable due to the costs involved.

MBE also manufactures a variety of vibrating screens, available up to 3,6 m in width and 6,75 m in length, in single or double deck configuration and in either circular or linear motion. The company’s screens have been operating in the African mining industry for the past 40 years, mainly in the coal, diamond and iron ore sectors.

With products for sizing, scalping, dewatering and media recovery, the company’s screens feature an innovative side plate mounted drive, making them lighter than those using vibrator motors. MBE also supplies screens with vibrator motors where required, while its resonance screens offer the benefit of low power consumption. Each screen is designed with sound mechanical features including vibration damping, side plates, cross members and the appropriate feed and discharge chutes. All types of screening surfaces can be accommodated.

Pin It

CONTACT

Editor
Arthur Tassell
Email: mining@crown.co.za
Phone: +27 11 622-4770
Fax: +27 11 615-6108

Advertising Manager
Bennie Venter
Email: benniev@crown.co.za
Phone: +27 11 622-4770
Fax: +27 11 615-6108


More Info

crown publications logo reversed

Crown Publications, one of South Africa’s largest business-to-business publishing houses, came into existence in 1986. Since then, the company has grown from producing a single magazine, Electricity SA (renamed Electricity+Control), to publishing six monthly magazines, three quarterlies, and a number of engineering handbooks.

EDITOR’S PICK

BLOG

POST GALLERY