Turck Banner’s inclinometers with a combined micro electro-mechanical system (MEMS) and gyroscope signal for moving applications are now also available with a switching output, well suited for use in the automotive industry, machine building, logistics and mobile equipment.
Range, zero point and window function can be adjusted to the user’s needs, via IO-Link or teach pin.
The QR20 inclinometer generates its signal from the combination of two measuring principles: a gyroscope signal and a MEMS acceleration measurement. In this way, the sensor combines the benefits of both measuring principles. The QR20 can mask out shocks and vibration more effectively than conventional signal filters. The B1NF and B2NF single and two-axis inclinometers thus provide a previously unknown degree of dynamic measurement for moving or vibrating machines.
The new QR20 variants switch when a threshold value or switching window is reached. Two switching windows can be set and used in NO or NC operation. The QR20 with switching outputs is particularly suitable for applications in which a simple switching signal in a PNP or NPN logic circuit is sufficient to indicate that a specific inclination angle has been reached and where a measuring inclination angle sensor would exceed requirements.
LED spirit level simplifies commissioning
The ‘spirit level function’ simplifies device installation. The flashing of an LED is used here to indicate the horizontal position of the sensor. This enables error-free and reliable installation of the sensor without any accessories. The use of translucent plastic for the LEDs eliminates potential weak points in the housing arising from LED lenses.
The devices can also be used for positioning and lifting applications. Turck Banner is adding four more devices to the existing portfolio of the four IO-Link inclinometers: the B1N single-axis and B2N two-axis inclinometers for static applications and the B1NF and B2NF for dynamic applications.
For more information visit: www.turckbanner.co.za
