The increased use of devices and appliances has resulted in the increased use of adaptors as well as adaptors-on-adaptors in South Africa. This creates a risk of fires, short circuiting and damage or malfunction of appliances. South African National Standard (SANS) 164-0 covers the specific requirements for plugs, sockets and adaptors and will lead to a new range of plugs and sockets in this country. The South African Bureau of Standards (SABS) demonstrated the new range of plugs and sockets in a virtual media briefing held recently.
“With the array of appliances and devices that have become commonplace in today’s world, it is critical to ensure that the plugs and sockets are also changing to accommodate the more compact designs of plugs. New homes and offices should be fitted with the sockets according to the latest revision of SANS 164-0 and the different parts. We need to be aware of the improved switching arrangements of switched socket-outlets, the inclusion of the SANS 164-2 compact design for 16 A plugs and, most importantly, the warnings that advise consumers not to use multiple adaptors, plugged into one another,” says Jodi Scholtz, Lead Administrator of SABS.
“SANS 164-0 covers the general requirements for plugs and socket outlets and is considered the base document for all the plugs and socket-outlets systems in South Africa. Every new building should have these new SANS 164-2 type of sockets and all appliances should be fitted with the new plugs. South Africa has been lagging behind with the implementation of these global changes and the continued use of adaptors onto adaptors will just lead to more dangerous electricity usage and malfunctioning of appliances,” warns Gianfranco Campetti, Chairperson of the Technical Committee responsible for the development of SANS 164 series of standards.
Campetti explains that since the 1900s British standards have guided South African installations and appliances. In the 1960s British standards for plugs and socket-outlets introduced a 'flat pin' design, not adopted by South Africa, which continued to use the large round pin (SANS 164-1) design, still in use today. Since then there have been 21 different types of plugs introduced, of various configurations and ratings. Most buildings still contain the traditional large 3-pin sockets and this has led to an increased use of adaptors. The revisions to the standard, published in July 2020 incorporate changes in technology covered in SANS 60884-1: Plugs and socket-outlets for household and similar purposes. SANS 60884-1 is an adoption of the International Electrotechnical Commission (IEC) 60884-1 standard which also covers the general requirements for plugs and socket-outlets.
New socket installations:
In the last few years, various iterations of the new design have been available on the market, which accommodate the following type of plugs:
- 3-pin plugs (old type)
- Compact 3-pin plugs
- USB outlets
Some of the sockets for the compact 3-pin will indicate whether they can accommodate a rewireable plug or not.
Summary of the amendments in SANS 164-0:
- Reducing the minimum clearance of an adaptor body to socket-outlet surface to 8,0 mm from 12,0 mm.
- Warning signs will appear on adaptors to prevent the use of multiple adaptors plugged into one another, thus avoiding the risk of electricity hazards due to overloading and poor connections.
- Introducing the symbol for adaptors not permitted to be plugged in one another in order to avoid straining the socket-outlet. This was as a safety risk to the consumer as the straining of the socket-outlet can cause a short-circuit between the neutral and live pins. This symbol has to be embossed on the adaptor to warn consumers on the danger of plugging adaptors from one another.
- Examples are provided to show how multiple switched socket-outlets for fixed installation should be switched.
- Since 2018, the wiring code (SANS 10142-1) requires socket-outlets in electrical installations to be of the SANS 164-2, at every socket outlet point. However other configurations (such as SANS 164-1) may also be installed onto the same outlet.
- The changes in SANS 164-0 are generic to all the SANS 164 series of standards namely Part 1 to Part 6. This means that the SANS 164 series of plugs and socket-outlets has to comply with SANS 164-0.
The SANS 164 series falls under SABS Technical Committee (TC) 067 Sub-committee (SC) 03 titled Electricity distribution systems and components: Electrical accessories. The scope of the TC covers standards for electrical accessories such as switches, plugs and socket-outlets, home automation devices, connectors, adaptors, couplers, cords extension sets and conduits (cable management systems) for use in household and similar low-voltage applications.
The TC067 SC03 consists of representatives from associations, manufacturers, regulators, power utility, testing laboratories, government departments and academic institutions. Should any member of the public be interested in joining the SC, they are welcome to submit their interest via www.sabs.co.za
Impact on the industry
The construction industry, electrical contractors and households need to be aware of the amended requirements for South Africa. It is expected that new buildings will need to comply with the new standards within the time frame listed in the wiring code.