fbpx

The range of HelaCon push-in wire connectors from HellermannTyton is used for fast, easy and reliable connection and distribution of cable and conductors in electrical housing applications. They may be used within a typical range of housing voltage up to 450 volts. A huge variety of input poles allows high flexibility in application depending on the number of wire conductors and available space.

Cross-sections of up to 2,5 mm² can conveniently be processed and allow the use of thicker conductors when a voltage drop occurs. The way of cable distribution and branch connections varies from country to country due to the different types of wires, diameters, colours, junction boxes and mounting systems in use.

Wire connectors for professional cable connections

No matter how distinct the individual requirements are – the HelaCon wire connector series offers the best solution for every task – worldwide. Different colour codes help to easily differentiate the sizes of the push-in wire connectors. All cable entries are in a row on one side. A separate voltage test entry on the front guarantees safety during application, installation and maintenance. Any conductor with cross-sections between 0.5 and 2.5 mm² can be used at the same time, without impact on the adjacent connection.

Being compact in size the push-in wire connectors HelaCon fit perfectly in tight spaces and can generally be used in all kinds of junction boxes either on-wall or flushmounted.

The range of push-in wire connectors is used for fast, easy and reliable connection and distribution of conductors in electrical housing applications. They are designed for use in a typical range of housing voltage up to 450 V.

A huge variety of input poles allows high flexibility in application depending on the number of wire conductors and available space. Diameters of up to 2.5 mm² can conveniently be processed and allow the use of thicker conductors when a voltage group occurs.

Being compact in size they fit perfectly in tight spaces and can generally be used in all kinds of junction boxes either on-wall or flush-mounted.

The HelaCon Easy connectors are exclusively designed for use with solid wire up to a diameter range of 2.5 mm². Bent, stranded or fine-stranded wire conductors may not be used.

Using HelaCon

  • Make sure that power is turned off before installation.
  • Use solid copper conductors only.
  • Strip them off approximately 11 mm.
  • Insert them completely into the wire connector.
  • Use voltage tester via separate test entry.
  • To change or correct a wire, hold and twist it alternatively left and right while pulling the wire connector.

Enquiries: www.hellermanntyton.co.za

Pin It

CONTACT

Editor
Gregg Cocking
Email: sparks@crown.co.za
Phone: +27 11 622-4770
Fax: +27 11 615-6108

Advertising Manager
Carin Hannay
Email: carinh@crown.co.za
Phone: +27 11 622-4770
Fax: +27 11 615-6108


More Info